LDMB 2014
$30 entry fee
Small or Big Block
( dot tires) ANY SIZE
Cast iron blocks only
Aluminum heads are fine
Single or Duel carbs are fine
Measuring from the front of the engine block the axle center must be within 12 inches.
Radiator must be in stock location
Steel body trucks or you can use “Pre-fab reinforced fiberglass hood and fenders”(heavy-duty)
Must have full beds with tail or air gate
Stock appearing trucks
Air or Electric shifters are fine
Trans-brakes are fine
Coil-overs are fine
3 and 4 link front / rear is allowed
Sliding and floating rear ends are allowed
After-market transfer cases are allowed
NO chain- drives
NO Nos
Rules are subject to change and new rules may apply(however) we will give you a month to comply